Table of Contents
Advertisement
CHECKING FUEL LEVEL, TOP UP
WARNING
Danger of fire! Spilled fuel may ignite!
Remove thoroughly any fuel which has spilled during filling
up.
1.
Turn the start switch to its operating position (2) and check the
fuel level on the fuel gauge (G).
2.
Reset the switch to switch position (1).
3.
Fill up the fuel tank with fuel through the filler inlet after you have
finished working.
For information on recommended oils, see section
"LUBRICANTS AND OPERATING AGENTS".
3.
Make sure that you reclose the tank tightly after filling up.
CHECKING CONTROL PANELS
1.
Turn the start switch to its operating position (2).
2.
Ensure that all control lights, measuring instruments and warning
lights light up for approx. 3 seconds and that the alarm buzzer
sounds for approx. 1 second.
NOTE
If a control lamp does not light up, arrange an inspection with the
responsible dealer.
Before starting up, do not only rely on the control panel. Perform
the prescribed pre-start checks and always carry out the operations
specified in the section on regular maintenance.
MAINTENANCE PRIOR TO STARTING UP
3-23
Advertisement
Table of Contents
