Yamaha WC42260 Owner's Manual page 342

342
Appendix B: Specifications
Input Channel CH1–96
TALKBACK
OSCILLATOR
STEREO OUT
OMNI OUT 1–8
CONTROL ROOM
MONITOR OUT (LARGE,
SMALL)
STUDIO MONITOR OUT
2TR OUT DIGITAL 1–3
DM2000—Owner's Manual
Input patch —
Phase Normal/reverse
On/off
3
Gate-type Key in: 12 ch Group (1–12, 13–24, 25–36, 37–48, 49–60, 61–72, 73–84,
85–96)/AUX1–12
On/off
4
Key in: self /Stereo Link
Comp-type
Pre EQ/pre fader/post fader
Attenuator –96.0 to +12.0 dB (0.1 dB step)
4-band PEQ
EQ
On/off
Delay 0–43400 samples
On/off —
Fader 100 mm motorized (INPUT/AUX1–12)
On/off
Aux send
AUX1–12; pre fader/post fader
On/off
Solo
Pre fader/after pan
Pan 127 positions (Left= 1–63, Center, Right= 1–63)
127 × 127 positions
Surround pan
LFE level –∞, –96 dB to +10 dB (256 step)
Routing STEREO, BUS1–8, DIRECT OUT
Direct out Pre EQ/pre fader/post fader
Displayed on LCD
Metering
Peak hold on/off
Level control Analog rotary potentiometer
AD converter 24-bit linear, 128-times oversampling
Talkback select Built-in microphone/AD IN 1–24
On/off —
Slate On/off
Level 0 to –96 dB (1 dB step)
On/off —
Waveform Sine 100 Hz, sine 1 kHz, sine 10 kHz, pink noise, burst noise
Routing BUS1–8, AUX1–12, MATRIX 1L–4R, STEREO L, R
DA converter 24-bit linear, 128-times oversampling
SURROUND MONITOR, STEREO, BUS1–8, AUX1–12, MATRIX 1L–4R,
Output patch DIRECT OUT 1–96, INSERT OUT (CH1–96, BUS1–8, AUX1–12,
MATRIX 1L–4R, STEREO)
DA converter 24-bit linear, 128-times oversampling
STEREO, 2TR IN DIGITAL 1, 2TR IN DIGITAL 2, 2TR IN DIGITAL 3, 2TR I N
Monitor select ANALOG 1, 2TR IN ANALOG 2, ASSIGN 1, 2 (BUS 1–8/AUX 1–12/MATRIX
1–4)
Solo contrast –96 to 0 dB (1 dB step)
Mono On/off
Dimmer On/off
DA converter 24-bit linear, 128-times oversampling
Level control Analog rotary potentiometer
Phones level Analog rotary potentiometer
Small trim Analog rotary potentiometer
Monitor select CONTROL ROOM, STEREO, AUX 11, AUX 12
DA converter 24-bit linear, 128-times oversampling
Level control Analog rotary potentiometer
On/off
Dither
Word length 16, 20, 24-bit
STEREO, BUS1–8, AUX 1–12, MATRIX 1L–4R, DIRECT OUT 1–96, INSERT
Output patch
OUT, CONTROL ROOM
SRC On/off (1:3 and 3:1 maximum input to output sample rate ratio)
5