Input/Output Characteristics - Yamaha 007POTO-G0 Owner's Manual

❏ Analog Input Characteristics
Input Terminals GAIN
-62 dB
INPUT 1-16 <LS9-16>
INPUT 1-32 <LS9-32>
+10 dB
*1. Sensitivity is the lowest level that will produce an output of +4 dBu (1.23 V) or the nominal output level when the unit is set to maximum gain. (all fad-
ers and level controls are maximum position.)
*2. XLR-3-31 type connectors are balanced. (1=GND, 2=HOT, 3=COLD)
* In these specifications, 0 dBu = 0.775 Vrms.
* All input AD converters are 24-bit linear, 128-times oversampling.
* +48V DC (phantom power) is supplied to INPUT XLR type connectors via each individual software controlled switch.
❏ Analog Output Characteristics
Output Terminals
OMNI OUT 1-8 <LS9-16>
OMNI OUT 1-16 <LS9-32>
PHONES OUT
*1. XLR-3-32 type connectors are balanced. (1=GND, 2=HOT, 3=COLD)
*2. PHONES OUT stereo phone jack is unbalanced. (Tip=LEFT, Ring=RIGHT, Sleeve=GND)
*3. There are switches inside the body to preset the maximum output level.
*4. The position of the level control is 10dB lowered from Max.
* In these specifications, 0 dBu = 0.775 Vrms.
* All output DA converters are 24-bit, 128-times oversampling.
❏ Digital Input Characteristics
Terminal
2TR IN DIGITAL Coaxial
❏ Digital Output Characteristics
Terminal
2TR OUT DIGITAL Coaxial

Input/output characteristics

Actual Load For Use With
Impedance Nominal
50-600Ω Mics &
3 kΩ
600Ω Lines
Actual Source For Use With
Impedance Nominal
75 Ω 600 Ω Lines
8 Ω Phones
15 Ω
40 Ω Phones
Format Data Length
IEC-60958 24 bit
Format Data Length
IEC-60958
24 bit
Consumer Use
Input/output characteristics
Input Level
Max. before
*1
Nominal
Sensitivity
-82 dBu -62 dBu -42 dBu
(61.6 µV) (0.616 mV) (6.16 mV)
-10 dBu +10 dBu +30 dBu
(245 mV) (2.45 V) (24.5 V)
Output Level
Gain Switch
Max. before
*3
Nominal
+24 dB +4 dBu +24 dBu
(default) (1.23 V) (12.3 V)
-2 dBu +18 dBu
+18 dB
(616 mV) (6.16 V)
*4
— 150 mW
75 mW
*4
— 150 mW
65 mW
Level
0.5 Vpp/75 Ω
RCA Pin Jack
Level
0.5 Vpp/75 Ω
RCA Pin Jack
LS9-16/32 Owner's Manual
Connector
clip
XLR-3-31 type
*2
(Balanced)
Connector
clip
XLR-3-32 type
*1
(Balanced)
Stereo Phone
Jack (TRS)
*2
(Unbalanced)
Connector
Connector
273