Philips AVENT SCF291 Manual page 13

5
Turn the on/off button to "Auto" mode. Then press it to
switch on the appliance.
• The appliance starts sterilizing first. All of the progress
indicator lights flash to show the appliance is sterilizing.
• After that, drying will start automatically. The progress
indicator lights flash and go off gradually to show the
appliance is drying.
• When the whole process is finished, the lights go off and
the appliance switches off automatically.
Caution: The base, the baskets and the lid become hot
during or shortly after operation.
6
Remove the lid.
7
Remove the bottles and other items from the basket. Use the tongs to remove the
smaller items.
Be careful. The sterilized items may still be hot.
Note: Make sure you wash your hands thoroughly before you touch the sterilized
items.
Note: The drying result may vary depending on the ambient temperature, ambient
humidity and loading of sterilizer. You can run one more complete drying cycle if
necessary.
8
Unplug the appliance and wait until the appliance has cooled down completely.
9
Remove the small basket and large basket.
Note: When you remove the large basket, be aware of the remaining water on the
base drip tray.
10
Detach the bottom plate from the large basket. Pour out any remaining water from
the large basket drip tray and clean it (see section "Cleaning")
Drying (SCF293)
1
Assemble the sterilizer (see section "Assembling the sterilizer") and place the items
to be dried in it.
Note: Make sure all the items are completely disassembled and placed in the
basket with their openings pointing down for effective drying.
Be careful. Hot steam will come out of the sterilizer when drying starts.
2
Place the lid on top of the small or large basket.
13
English
1
2