Yamaha AV-S70 Owner's Manual page 26

OPERATING OTHER COMPONENTS USING THE REMOTE CONTROL
Using auto preset
1
Turn on the power of the component (TV, VCR
or satellite tuner/cable TV) to be controlled by
the remote control.
2
Press the remote control selector button
corresponding to the component for which
auto preset is to be performed. (Press "TV" for
TV, "VCR" for VCR, and "SAT" for satellite
tuner/cable TV.)
The signals for controlling the front speaker unit have
already been set for the S70 button so that only the
manufacturer code for the TV, VCR or SAT needs to be
set. A manufacturer code can be set for a single button
if necessary.
24
3
Transmission
indicator
4
5
Hold down SET and press c until the
transmission indicator lights.
The indicator will light.
While the transmission indicator is lit, using
the numeric buttons, if you selected "TV"
under step 2, enter "0001"; if you selected
"VCR", enter "0002"; and if you selected
"SAT", enter "0003" for satellite tuner or "0004"
for cable TV.
The indicator will go out.
Hold down SET and press c until the
transmission indicator lights.
The indicator will light.