Hmi Software - Siemens SINUMERIK 840Di System Overview

02.2001
•
Dynamic axis/spindle functions
•
Programmable acceleration response
•
Freely programmable motion-synchronized actions
•
Freely selectable path and time-optimized changeover methods between trav-
ersing blocks
•
Optimized interpolation methods (NURBS, spline, polynominal interpolation)
•
Electronic gear functions
•
Kinematic transformations (TRANSMIT, 3 to 5-axis and cylinder peripheral
surface transformations etc., interlinked transformations)
•
Compensations (backlash/leadscrew/quadrant error compensation, etc.)
•
Channel and axis-specific measuring functions
•
Integrated high-level language commands (control structures, program coordi-
nation, etc.)
A complete list of all NC functions provided for the SINUMERIK 840Di by default or
optionally is to be found in:
Catalog NC 60·2000/2001, Chapter 2, Overview of Functions
4.3

HMI software

To start up, program and operate the SINUMERIK 840Di, comprehensive applica-
tions from the so-called HMI modular system are available. This HMI modular sys-
tem is conceived as an open architecture system providing several configurations:
•
SINUMERIK 840Di Startup, a straightforward user interface to become ac-
quainted with the SINUMERIK 840Di
•
HMI Advanced, the standard user interface for machine tools (option)
•
HMI Configuring Package based on SIMATIC ProTool/Pro and ProTool/Pro
SINUMERIK Option (option)
•
HMI Programming Package based on COM/OPC (option)
840Di Startup
The 840Di-Startup user interface is intended to become acquainted with the
SINUMERIK 840Di functionality. It is part of the scope of supply of the SINUMERIK
840Di and is already preinstalled on the hard disk of the PCU.
840Di Startup as a real Windows application is designed fully window-oriented and
includes the following functions:
•
Display of main screens
•
Display of alarms and messages
© Siemens AG 2001 All Rights Reserved
SINUMERIK 840Di System Overview (SYI) - 02.2001 Edition
4 Software
-33
4