Setting The Brightness Of The Front Panel Display - Yamaha MusicCAST MCX-1000 Owner's Manual

3 Use / / / to select a standby mode, and
press SELECT.
• "Mode 1"
You can only activate the MusicCAST server from the
remote control or the MusicCAST server.
• "Mode 2"
You can activate the MusicCAST server from the remote
control, the MusicCAST server, and MusicCAST clients
connected to the MusicCAST server.

Setting the brightness of the front panel display

You can set the brightness of the front panel display to suit your needs. For example, you may want to darken the
on-screen display so that it is not overly bright if you are operating the MusicCAST server in a room used for
viewing movies.
1 Follow the procedure described on page 117
"Opening the system setting screens" to
display the System Setup screen.
2 Use / to move the cursor to "FL Dimmer"
and press SELECT.
The FL Dimmer screen appears on the on-screen display.
3 Use / to select a brightness mode, and
press SELECT.
• "Bright"
Sets the front panel display to maximum brightness.
• "Medium"
Sets the front panel display to medium brightness.
• "Dark"
Sets the front panel display to minimum brightness.
4 Press BACK to return to the System Setup
screen.
HINT
HINT
Press BACK to return to the previous screen.
4 Use / / / to move the cursor to "OK" and
press SELECT.
The display returns to the System Setup screen.
Select "Cancel" to return to the System Setup screen without
changing any settings.
HINT HINT
Press BACK to return to the previous screen. See page 18 for
more information on standby modes.
127
System setup