Yamaha 480 Owner's Manual page 18

This convenient feature automatically searches for the part on a disc where the source level peaks, and next plays the part
repeatedly. For recording to tape, this feature is very helpful to adjust the recording level on the tape deck.
1
Stop the unit.
2
The peak level searching is performed through the disc.
1 2 3 4 5 6 7
1 2 3 4 5 6 7
Next, the part where the source level peaks is repeatedly
played. Adjust the recording level on the tape deck
listening to this repeat play.
18
Automatic searching of the peak level on a disc
STOP
PEAK
PEAK
PEAK
REPEAT
8 9 10 11 12
PEAK
REPEAT
8 9 10 11 12
OPEN/CLOSE TIME
DIMMER
PROG TAPE CLEAR PEAK 2
SPACE S/F RANDOM
REPEAT
+
1 2 3 10
4 5 6
7 8 9 0
SKIP PAUSE PLAY
1
SEARCH INDEX STOP
– +
OUTPUT LEVEL
SYNCHRO
To cancel this function
Press the STOP button. (Some other buttons can also be
used to cancel this function.)
Notes
•
Even if the peak level searching is performed twice or more
on the same disc, the same part will not be always selected,
because this unit will search for the peak level among parts
on the disc that are randomly selected by the internal
microcomputer.
•
In the program play mode, this feature will function among
the programmed tracks only. If program play is being
performed, first press the STOP button, and then press the
PEAK button. If program play is not being performed, only
press the PEAK button.