Adaptor / Convertor / Maintenance Tool - Fujitsu Airstage J-II Series Design & Technical Manual

1-4. ADAPTOR / CONVERTOR / MAINTENANCE TOOL

Network Convertor
For two wire type and three wire
type remote controller.
Split type systems can be
controlled from a central controller
via the convertor.
Network Convertor for L
For connection between
VRF network system and a
L
ON
management of small to medium-
sized BMS.
Thermostat Convertor
For control Fujitsu General
products using a third-party
thermostat.
®
BACnet Gateway (Hardware)
For connection between VRF
network system to the BMS
system using BACnet
Supports max.128 indoor units.
Signal Amplifier
If the total length of
transmission line exceeds
1,640 ft. (500 m), or the number
of units
exceeds 64, Signal Amplifier
will be necessary to use.
Model : UTY-VTGX
W ®
ON ORKS
Model : UTY-VLGX
®
W open network for
ORKS
Model: UTY-TTRX
Model : UTY-VBGX
® protocol.
Model : UTY-VSGXZ1
Network Convertor
®
Modbus Convertor for VRF
®
BACnet Gateway (Software)
External Switch Controller
Models : UTY-TERX, UTY-TEKX
- (01-09) -
Model : UTY-VGGXZ1
For three wire type remote
controller.
Split type systems can be
controlled from a central
controller via the convertor.
Model : UTY-VMGX
For connection between VRF
network system and a Modbus
open network.
Model : UTY-ABGXZ1
The central control of
maximum 1600 indoor units
can be realized by connecting
the VRF network system to
the BACnet ® , a global standard
of the open network.
Air conditioner switching
can be controlled by
connecting other external
sensor switches.
®