Before Getting Started; Inserting The Batteries - Silvercrest STMS 2017 A1 User Manual And Service Information

Wireless keyboard with wireless mouse STMS 2017 A1

Before Getting Started

Unpack all the devices and use the package contents checklist on page 48 to verify that you have
received all items listed.

Inserting the Batteries

Insert the batteries into the wireless keyboard and wireless mouse as shown in the following figures. Take
care to insert the batteries into the device observing the correct polarity (+ and – ) The correct polarity is
labelled on the batteries and inside the battery compartment.

Open the battery compartment of the wireless mouse and insert the batteries. Then close the
battery compartment.

Remove the bottom part of the wireless mouse. To do this, press the unlock button (14) on the
back of the wireless mouse. The lock will release and you can open and remove the bottom
part.

Insert the batteries.

Remove the USB nano receiver (C) from its storage compartment (17).

Close the wireless mouse. To do this, insert the noses on the bottom part into the hole located
on the front of the wireless mouse. Then close the bottom part on the wireless mouse until the
unlock button (14) clicks into place.

Press the On/Off switch (15) to position "ON" to power the wireless mouse on.
Fig.: Detailed view of bottom of the keyboard
English
55