Installing Cables - Huawei PDU8000 Quick Manual

5. Reconnect the ground cables to the front
and rear doors.
6. Reinstall the buckles on the front and rear
doors, and install the rubber plug supports,
as shown by (1) in the figure.
The rubber plug supports are closely installed
on the right of the front door buckle and left
of the rear door buckle.
7. Install the front and rear bottom sealing
plates for the cabinet, as shown by (2) in
the figure.
8. Clip the side bottom sealing plate, as
shown by (3) in the figure.
The side bottom sealing plate does not need to be installed for the cabinet side to be combined.
5

Installing Cables

5.1
Cable Routing Rules
Binding Cables
No. Cable Binding Rules
1 Power cables and signal cables are bound separately with a distance above 150 mm.
Both ends of a cable are labeled. Labels are clean and correct, and provide concise and
2
understandable description.
Cable ties are neatly cut without sharp burs, evenly distributed, bound to a proper
3
strength, and fastened towards the same direction if possible, as shown in the figure.
4 Each bundle contains no more than 15 cables, and cables are neatly bound.
5 Extra cables are coiled neatly and easy to find.
Cables on the surface of a large cable bundle are neatly organized without unnecessary
6
crossover.
Arrange cables on distinct layers and prevent cable tangles that are avoidable when
7 cables in different colors are bound together, as shown in the figure. Cables are arranged
by thickness when arrangement by thickness conflicts with arrangement by color.
Cables are reliably bound along the route, and the binding interval meets the
8
requirements in the table.
11