Radio - Panasonic SC-UA30 Operating Instructions Manual

█ Note on USB device
• This system does not guarantee connection with all
USB devices.
• This system supports USB 2.0 full speed.
• This system can support USB devices of up to 32 GB.
• Only FAT 12/16/32 file system is supported.
█ Note on MP3 file
• Files are defined as tracks and folders are defined as
albums.
• Tracks must have the extension ".mp3" or ".MP3".
• Tracks will not necessarily be played in the order you
recorded them.
• Some files can fail to work because of the sector size.
MP3 file on USB device
• This system can access up to:
– 800 albums (including root folder)
– 8000 tracks
– 999 tracks in one album

Radio

Preparation
Press [SELECT <, >] repeatedly to select "FM".
Manual tuning
1
Press [PLAY MENU] repeatedly to select
"TUNE MODE".
Or press [8] on the unit to select "MANUAL". Continue
with step 3.
2
Press [R, T] to select "MANUAL" and then press
[OK].
3
Press [2/3] or [5/6] to tune in to the
station.
To tune automatically, press and hold the button until
the frequency starts changing quickly.
Memory presetting
You can preset up to 30 FM stations.
█ Automatic presetting
1
Press [PLAY MENU] to select "A.PRESET".
2
Press [R, T] to select "LOWEST" or "CURRENT"
and then press [OK].
LOWEST Tuning begins from the lowest
frequency.
CURRENT Tuning begins from the current
frequency.
The tuner presets all the stations it can receive into the
channels in ascending order.
To cancel, press [8].
█ Manual presetting
1
Press [PLAY MENU] repeatedly to select
"TUNE MODE".
Or press [8] on the unit to select "MANUAL". Continue
with step 3.
2
Press [R, T] to select "MANUAL" and then press
[OK].
3
Press [2/3] or [5/6] to tune in to the
station.
4
Press [OK].
5
Press [R, T] to select a preset number and then
press [OK].
Do steps 3 through 5 again to preset more stations.
The new station replaces any station that occupies the
same preset number.
█ Selecting a preset station
1
Press [PLAY MENU] repeatedly to select
"TUNE MODE".
Or press [8] on the unit to select "PRESET". Continue
with step 3.
2
Press [R, T] to select "PRESET" and then press
[OK].
3
Press [2/3] or [5/6] to select the preset
station.
RDS broadcasting
This system can show the text data transmitted by the
radio data system (RDS) available in some areas.
Press [DISPLAY] repeatedly.
PS Programme service
PTY Programme type
FREQ Frequency
Note:
RDS may not be available if reception is poor.
9
9