Figure 13-13 Ad(A)-R Switch Default Settings; Table 13-2 Ad(A)-R Unit Switch Settings - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
System Hardware Manual
3.2.2 Switch Settings
The AD(A)-R Unit has two switch locations SW1/SW2. The location
of the switches on the AD(A)-R Unit is illustrated in
AD(A)-R Switch Default
technician to configure the unit for specific settings.
To provide control to the recorder or to enable/disable the record
start warning tones, refer to
Settings.
Switch
SW1
SW2
Settings. The dip switches (DSW) allow a

Figure 13-13 AD(A)-R Switch Default Settings

Table 13-2 AD(A)-R Unit Switch

Table 13-2 AD(A)-R Unit Switch Settings

SW1-1 Connects to Multiline Terminal
Connect = Default
SW1-2 Not Used
Sets External Equipment Impedance to 600 Ω
SW2-1
SW2-2 Used for Complex Impedance Devices
(< 30 Ω Input Impedance)
Figure 13-13
Description/Settings
Issue 1.0
13 - 11