Huawei NetCol5000-C030H90D0 User Manual page 191

NetCol5000-C(030, 032, 065) In-row Chilled Water
Smart Cooling Product
User Manual (2019)
Procedure
Step 1 Tap Maint > USB Operations > Export to enter the Select Path screen, as shown
in Figure
Figure 7-21 Select path
Step 2 Tap the file where the user saves current data in the Select Path dialog box and
tap Next. Then tap Yes in the displayed dialog box.
Step 3 After the data is successfully exported,
Figure 7-22 Screen showing that data export has succeeded
Step 4 Click Maint > USB Operations > Remove USB to remove the USB flash drive in
safe mode.
----End
Issue 03 (2020-08-30)
NO TE
● Before exporting active alarms, historical alarms, logs, and configurations, ensure that
the USB flash drive has been successfully identified. The USB port is located on the side
of the main control board.
● If the USB flash drive has been successfully identified,
● If the USB flash drive is not properly connected, the system will display No USB device
found. during operations about the USB flash drive.
7-21.
Copyright © Huawei Technologies Co., Ltd.
is displayed in the status bar.
Figure 7-22 is displayed. Click Finish.
7 FAQ
183