Basic Operator Panel - Siemens SINAMICS G120P Manual

2 Engineering
The PM240-2 power modules for standard applications are available in the
following sizes and supply voltages:
Single-phase, 200V ... 240 V
Three-phase, 200V ... 240 V
Three-phase, 380V ... 480 V
Three-phase, 500V ... 690 V
2.1.2

Basic Operator Panel

The SINAMICS frequency inverter is parameterized using the "SINAMICS G120
Basic Operator Panel 2" (BOP-2). With this panel you parameterize the drive and
acknowledge fault messages.
Note A detailed description of the "SINAMICS Basic Operator Panel" (BOP-2) can be
found in the operating instructions:
https://support.industry.siemens.com/cs/ww/en/view/109483379
Figure 2-2: Basic Operator Panel
ESC
OFF
Table 2-1: Function of the keys
Key
ESC
OPEN
Pump with SINAMICS G120P
Entry-ID: 109759888, V1.0.1,
Connection type
MANUAL/AUTO
If the button is pressed for less than 2 seconds, the BOP-2 will return to the
previous screen or, if a value has been changed, the new value will not be
saved.
If the button is pressed for more than 3 seconds, the BOP-2 returns to the
status screen.
When navigating through a menu, the available screens are scrolled by
pressing the up key.
When changing a parameter value, the displayed value is increased by
pressing the key.
09/2019
Performance
0.55 kW ... 4 kW
5.5 kW ... 55 kW
0.55 kW ... 250 kW
11 kW ... 250 kW
Display
Up and Down
OK
ON
Function
7