Commissioning - Huawei STS-6000K-H1 Installation Manual

STS-6000K-H1 Smart Transformer Station (Vietnam,
Duc Long Gai Lai)
Installation Guide

Drilling Holes
When drilling holes into a wall or floor, observe the following safety precautions:


Moving Heavy Objects



1.6 Commissioning

When the equipment is powered on for the first time, ensure that professional personnel set
parameters correctly. Incorrect settings may result in inconsistency with local certification and
affect the normal operation of the equipment.
Issue 02 (2020-02-21)
When climbing a ladder, take the following precautions to reduce risks and ensure
safety:
Keep your body steady.
−
− Do not climb higher than the fourth rung of the ladder from the top.
− Ensure that your body's center of gravity does not shift outside the legs of the
ladder.
Wear goggles and protective gloves when drilling holes.
When drilling holes, protect the equipment from shavings. After drilling, clean up any
shavings that have accumulated inside or outside the equipment.
Be cautious to avoid injury when moving heavy objects.
When moving the equipment by hand, wear protective gloves to prevent injuries.
Copyright © Huawei Technologies Co., Ltd.
1 Safety Precautions
6