Epson EF-100 Series User Manual page 86

Power light Status light
Blue Flashing blue
Flashing blue Off
Off Flashing blue
Off Flashing blue
Off Flashing blue
Laser light Temp light
Off Off
Off Off
Flashing Off
orange
Off Flashing
orange
Off Orange
86
Status and solution
Warming up. Wait for about 30
seconds for an image to appear. All
buttons are disabled.
Cooling down or shutting down. All
buttons are disabled.
The projector is preparing to enter
USB Power in Standby mode
Internal projector error. Turn the
projector off, unplug it, and contact
Epson for help.
A fan or sensor has a problem. Turn
the projector off, unplug it, and
contact Epson for help.
Projector has overheated and turned
off. Leave it turned off to cool down.
After about five minutes, do the
following:
• Make sure that the vents are not
clogged with dust or obstructed by
nearby objects.
• Clean or replace the air filter.
• If operating the projector at high
altitude, turn on High Altitude
Mode.
• If the problem persists, unplug the
projector and contact Epson for
help.