Ironing; Steamboost" Function; Vertical Steam - Bosch I4 EasyComfort Series Operating Instructions Manual

3. Ironing

1 Press the steam release button (12) for ironing with
steam.
Important: When placing the iron on the pad (10), be
sure to first insert the heel in the upper side of the control
panel, as shown in the figure.
Tip: The most efficient way to iron with steam generators
is to use the steam function in a forward direction (the
steam permeates the fabric and gives volume back to it)
and in a backwards direction without steam (fixing the
fabric). This ensures that excessive steam is released and
the fabric dries faster while obtaining longterm crease
protection.The potential build-up of condensed water can
be avoided or at least minimized.
Warning: Ironing with an excessive amount of steam
may produce condensation of the hot water and
dripping from the ironing board or through any other
permeable surface. To prevent scalds or burns,
please follow the instructions in this user manual.

"SteamBoost" function

SteamBoost
This appliance has a special function for tackling difficult
creases.
1 Press the steam release button (12) two times in
quick succession (double-click). Powerful shots of
steam will be released.

Vertical steam

Can be used to remove creases from hanging clothes,
curtains, etc.
1 Hold the iron in an upright position 15 cm away from
the garment to be steamed.
2 Press the steam release button (12) repeatedly with
pauses of at least 5 seconds.
Warning! : never point the steam jet at garments
being worn, or at people or animals.
* Model dependent
2
1
2x
5"
15 cm
BOS CH
9