The documentation contains important safety messages. It is mandatory to read and understand the safety messages prior to installation of the hardware. More information Find more information, software downloads, and documentation at: www.boschsecurity.com and the respective product page. 2019-12 | V1 | DOC Operation manual Bosch Security Systems B.V.
Requirements for operational purpose Make sure the following requirements are fulfilled: – 1 to 4 ready-to-use Bosch VIDEOJET decoder with firmware 9.60 or later connected to a surveillance network (fully installed and ready for operation) – 1 to 4 KBD-UXF or KBD-Digital keyboards (fully installed and ready for operation) –...
Playback is only possible from local recordings, not from recordings managed by VRM. – A long i-frame distance leads to less exact navigation in playback mode and lower performance in playback backwards mode. 2019-12 | V1 | DOC Operation manual Bosch Security Systems B.V.
Focus Use to control the zoom function of a Press to adjust the Focus respectively. device or the built-in digital zoom factor. Iris Press to adjust the Iris respectively. Bosch Security Systems B.V. Operation manual 2019-12 | V1 | DOC...
Clr - Clear - cancels a function Press the key to cancel a function. Alarm Not used Shot Not used 1 …. 0 Number keys Use to select favorite views, sequences or single devices. 2019-12 | V1 | DOC Operation manual Bosch Security Systems B.V.
Note: This key provides a round-trip function. The first layout starts again, if the last layout is reached. Previous Monitor - Selects the previous monitor Press the key to select the previous monitor. Bosch Security Systems B.V. Operation manual 2019-12 | V1 | DOC...
PIP - Turns full-screen with picture-in-picture on/off Press the key to turn full-screen with picture-in-picture on or off. Show Cam ID - Displays the camera numbers and camera IP addresses 2019-12 | V1 | DOC Operation manual Bosch Security Systems B.V.
Note: Selecting another layout, camera or monitor also unfreezes the video. 4.2.4 Softkey mapping playback menu The playback menu is only available if a playback permission for the decoder is defined in the Configuration Manager program. Bosch Security Systems B.V. Operation manual 2019-12 | V1 | DOC...
Press the ENTER key. In the Main Menu, press the Next Monitor or Previous Monitor key to select the monitor. 4.3.3 Controlling playback speed factor To control the playback speed factor 2019-12 | V1 | DOC Operation manual Bosch Security Systems B.V.
4.3.5 Locking/unlocking the keyboard To lock the keyboard: Press the Logout key. To unlock the keyboard: Press the Logout key. Enter the IP Matrix passcode. Press the Enter key. Bosch Security Systems B.V. Operation manual 2019-12 | V1 | DOC...
Check the number of decoders that defines connections. the maximum possible connections on one decoder device. Your layout may provide more monitors than allowed by the maximum monitors per display. 2019-12 | V1 | DOC Operation manual Bosch Security Systems B.V.
Page 15
IP Matrix 9.60 for KBD Digital Troubleshooting | Bosch Security Systems B.V. Operation manual 2019-12 | V1 | DOC...