Advertisement
Safety precaution
• make sure to disconnect the power source
before maintenance.
• don't damage the related part in maintenance
• wear the protection equipment in
maintenance
Replace the front cover
remove the front cover by
releasing the screws.
Replace the push-button switch
release the screw as indicated
above.
disconnect the connector
used for linking push-button
switch with motor.
pull out the cap as shown in
figure above before releasing the
screw in middle , and this screw
have the different type from
others, don't mix up.
release the screw as indicated
above.
completely remove switch
board.
you can replace the
front cover after removing.
remove switch board note
it's still connected with supply
mains
release the screw as
indicated above
Advertisement
