Led Module; Feedback Module; Motor Drive Module - Fujitsu F2MC-8FX Series Setup Manual

8-bit, ev board
Hide thumbs Also See for F2MC-8FX Series:
Table of Contents

Advertisement

2.4.5

LED Module

There are four LEDs on the LED module of EV board. They show the system status.
Module
name
D8
D9
LED
D10
D11
2.4.6

Feedback Module

The module inputs the motor back EMF signal to MCU.
2.4.7

Motor Drive Module

The module is designed for driving motor. It features the following functions:
250V 3.0A 3-phase FRFET inverter including high voltage integrated circuit (HVIC);
HVIC for gate driving and under voltage protection;
Optimized for low electromagnetic interference;
Isolation voltage rating of 1500Vrms for 1min.
EV BOARD MB2146-440-E V1.4
Chapter 2 EV Board Introduction
Function
Show motor status: stopped, running, error
Show motor running orientation
Show motor driving method:
hall sensor or Back EMF
Reserve
MCU-AN-500070-E-14 – Page 13
Remark
ON
Running
OFF
Stopped
Winking
Error
ON
Clockwise
OFF
Counter clockwise
ON
Hall sensor
OFF
Back EMF

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mb95330 seriesMb2146-440-e

Table of Contents