Operation - Toro 119-1100 Installation Instructions Manual

Operation

Controls
Using the Nozzle-Direction Button
Press the button to rotate the nozzle to the desired direction
(Figure 15).
2
3
Figure 15
1. Nozzle-direction button
2. Throttle/engine-speed
knob
Using the Throttle/Engine-Speed Knob
Rotate the knob to F to increase the engine speed, or to
AST
S to decrease the engine speed
LOW
Using the Key Switch
The key switch (which is used to start and stop the engine),
has 3 positions: O , R
FF UN
Rotate the key clockwise to the S
the starter motor. Release the key when the engine starts.
The key will automatically move to the O
the engine off, rotate the key counterclockwise to the O
position (Figure 15).
1
g018877
3. Key switch
(Figure 15).
, and S .
TART
position to engage
TART
position. To shut
N
FF
7