Advertisement
Quick Links
Product End-of-Life Disassembly Instructions
Product Category: Notebooks and Tablet PCs
Marketing Name / Model
[List multiple models if applicable.]
HSN-I34C
HP ProBook x360 435 G7 Notebook PC
HP ProBook x360 435 G7
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the
disassembly of HPI products to remove components and materials requiring selective treatment, as defined by EU directive
2012/19/EC, Waste Electrical and Electronic Equipment (WEEE).
NOTE: Recyclers should sort plastic materials into resin streams for recycling based on the ISO 11469 plastic marking code on the
plastic part. For any questions on plastic marking, please contact
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as applicable.
Item Description
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries, excluding Li-Ion batteries.
Li-Ion batteries. Include all Li-Ion batteries if more than
one is provided with the product (such as a detachable
notebook keyboard battery, RTC coin cell, etc.)
Mercury-containing components
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring greater
than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
EL-MF877-00
Template Revision C
Last revalidation date 09-May-2018
Notes
With a surface greater than 10 sq cm
All types including standard alkaline, coin or button style
batteries
Battery(ies) are attached to the product by (check all
that apply with an "x" inside the "[ ]"):
[X] screws
[ ] snaps
[ ] adhesive
[X] other. Explain cable
NOTE: Add detailed removal procedures including
required tools in the sections 3.1 and 3.2.
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Includes background illuminated displays with gas
discharge lamps
DC Cable for External Power Supply
HPI instructions for this template are available at
HP's Sustainability
Contact.
EL-MF877-01
Quantity of
items
included in
product
2
0
1
0
0
0
1
0
Page 1
Advertisement
Related Manuals for HP ProBook x360 435 G7 Notebook PC
Summary of Contents for HP ProBook x360 435 G7 Notebook PC
- Page 1 Marketing Name / Model [List multiple models if applicable.] HSN-I34C HP ProBook x360 435 G7 Notebook PC HP ProBook x360 435 G7 Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HPI products to remove components and materials requiring selective treatment, as defined by EU directive 2012/19/EC, Waste Electrical and Electronic Equipment (WEEE).
- Page 2 Quantity of items Item Description Notes included in product Plastics containing Brominated Flame Retardants weighing > 25 grams (not including PCBs or PCAs already listed as a separate item above) Components and parts containing toner and ink, Include the cartridges, print heads, tubes, vent including liquids, semi-liquids (gel/paste) and toner chambers, and service stations.
- Page 3 3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items contained in the product that require selective treatment (with descriptions and arrows identifying locations). EL-MF877-00 Page 3 Template Revision C Last revalidation date 09-May-2018 HPI instructions for this template are available at EL-MF877-01...
- Page 4 MANUFACTURING PROCESS INSTRUCTIONS MECHANICAL ASSEMBLY MODEL : Primrose Sub-assembly name: Primrose 拆机 SOP Document No.: Primrose 拆机 SOP Written by: Revision: 0.10 周贵玲 1 of 25 Date: 2020/2/27 Page: A.Current station version list: Sta. Ver. Sta. Ver. Sta. Ver. Sta. Ver.
- Page 5 Operation instruction 1(1/1) Document No. : Primrose disassembly SOP Station Operation name : Ver. : 0.10 editing date : 2020/2/27 Disassemble the base screw Steps： 1. Disassemble the screws*5 on the lower of the base according to the sequence shown in the figure。...
- Page 6 Operation instruction 2(1/1) Document No. : Primrose disassembly SOP Station Operation name : Ver. : 0.10 editing date : 2020/2/27 Disassembly of base cover2 Steps： 1. Disassemble the screws*2 on the lower of the base according to the sequence shown in the figure。...
- Page 7 Operation instruction 3(1/1) Document No. : Primrose disassembly SOP Station Operation name : Ver. : 0.10 editing date : 2020/2/27 Remove the base cover Steps： 1. Use the disassembly bar to pry off the base cover from the hinge cap and hook according to the sequence shown in the figure, and then place it in the material box。...
- Page 8 Operation instruction 4(1/1) Document No. : Primrose disassembly SOP Station Operation name : Ver. : 0.10 editing date : 2020/2/27 Battery dismantling Steps： 1. According to the sequence shown in the figure,remove the fixing screws*4。 (figure 1) ❖ Torque：1.5 ± 0.2 Kgf．cm ❖...
- Page 9 Operation instruction 5(1/1) Document No. : Primrose disassembly SOP Station Operation name : Ver. : 0.10 editing date : 2020/2/27 Disassembly DDR Shield Bracket Steps： 1. Remover the DDR shield Bracket from MB and place it in the material box. ❖...
- Page 10 Operation instruction 6(1/1) Document No. : Primrose disassembly SOP Station Operation name : Ver. : 0.10 editing date : 2020/2/27 Disassembly SSD Shield Bracket Steps： 2. Remover SSD shield Bracket from M/B。 ❖ Make M/B Clips 13（figure2）。 ❖ When taking DDR shield Bracket，do not damage the upper M/B components.
- Page 11 Operation instruction 7(1/2) Document No. : Primrose disassembly SOP Station Operation name : Ver. : 0.10 editing date : 2020/2/27 Disassembly DDR AMD-B Steps： 1. Open the buckle of the main DDR with both hands at the same time,and the DDR will pop up to the tilt automatically（figure2）...
- Page 12 Operation instruction Document No. : Primrose disassembly SOP Station 7(2/2) Operation name : Ver. : 0.10 editing date : 2020/2/27 DDR disassembly specification Steps： 1. Only one ram can be taken and put at a time,when taking and putting ,fingers can only hold both sides of ram(figure1)。...
- Page 13 Operation instruction 8(1/1) Document No. : Primrose disassembly SOP Station Operation name : Ver. : 0.10 editing date : 2020/2/27 Disassembling FFC/FPC(1) Steps： 1.Remove K/b menbrance from M/b CNTR。(figure1) ❖ Open the piano cover of CNTR and exit the line。 ❖...
- Page 14 Operation instruction 9(1/1) Document No. : Primrose disassembly SOP Station Operation name : Ver. : 0.10 editing date : 2020/2/27 Disassembly FFC/FPC(二) Steps： Camera Click pad 1. Remove click pad FFC from M/b CNTR 。(figure1) ❖ Open the piano cover of CNTR and exit the line 。 ❖...
- Page 15 Operation instruction 10(1/1) Document No. : Primrose disassembly SOP Station Operation name : Ver. : 0.10 editing date : 2020/2/27 Disassembly EDP & WLAN Antenna cables Steps： 1. Remove the WLAN main&aux sub antenna connector from the module terminal block。 (figure1) ❖...
- Page 16 Operation instruction 11(1/1) Document No. : Primrose disassembly SOP Station Operation name : Ver. : 0.10 editing date : 2020/2/27 Disassembly DC-IN cable&IO Holder Steps： 1. Remove DC-in cable from M/b CNTR 。(figure1) Redundant line ❖ Push back DC-in cable CNTR with both thumbs down plug until exiting M/B CNTR 2.
- Page 17 Operation instruction 12(1/1) Document No. : Primrose disassembly SOP Station Operation name : Ver. : 0.10 editing date : 2020/2/27 Dismantle the hingel screw on the main upper Steps： 1. Open the hinge to about 100 to 110 and place it on the load support fixture (figure1) 2.
- Page 18 Operation instruction 13（1/1) Document No. : Primrose disassembly SOP Station Operation name : Ver. : 0.10 editing date : 2020/2/27 disassemble WLAN/WWAN/SSD Steps： 1. Remove the screw*1。(figure1) ❖ Screw material NO.: 6052B0156201 (M2.0x2.0) ❖ Torque：1.5 ± 0.2 Kgf．cm ❖ Screw do not slide back when disassembling 2.
- Page 19 Operation instruction 14(1/1) Document No. : Primrose disassembly SOP Station Operation name : Ver. : 0.10 editing date : 2020/2/27 disassembly Thermal Module Steps： 1. Disassemble fixing screws*6。(figure1） ❖ Torque：1.5 ± 0.2 Kgf．cm ❖ Do not slide the screw when disassembling ❖...
- Page 20 Operation instruction 15(1/1) Document No. : Primrose disassembly SOP Station Operation name : Ver. : 0.10 editing date : 2020/2/27 Dismantling FAN & Speaker Cable Steps： 1. Exit fan cable CNTR and speaker cable(figure1,2) ❖ When exiting cable CNTR, do not tilt or pull it out violently 2.
- Page 21 Operation instruction 16(1/1) Document No. : Primrose disassembly SOP Station Operation name : Ver. : 0.10 editing date : 2020/2/27 Dismantling USB Bracket &RTC battery Steps： 1. Disassemble the USB bracket bolts screws *2 in the sequence shown in the figure1。 ❖...
- Page 22 Operation instruction 17(1/1) Document No. : Primrose disassembly SOP Station Operation name : Ver. : 0.10 editing date : 2020/2/27 Disassemble M/B Screw Steps： 1. Disassemble the M/B screw*5 according to the sequence shown in the figure1. ❖ Screws material NO : 6052A0053001 (M2.0x2.5) ❖...
- Page 23 Operation instruction 18(1/1) Document No. : Primrose disassembly SOP Station Operation name : Ver. : 0.10 editing date : 2020/2/27 Remove MB from upper cover(2) Steps： 1. Remove M/B。(figure1) ❖ Slowly lift the right end of M/B,then exit the left end of audio jack.
- Page 24 Operation instruction Document No. : Primrose disassembly SOP Station 19(1/1) Operation name : Ver. : 0.10 editing date : 2020/2/27 Disassembly 2nd Camera Steps： With 2nd Camera SKU 1. Remove Bracket & K/B screws*3 at the right corner of Support Bracket 。(figure1/2) ❖...
- Page 25 Operation instruction Document No. : Primrose disassembly SOP Station 20(1/1) Operation name : Ver. : 0.10 editing date : 2020/2/27 dismantling2nd Camera Steps： With 2nd Camera SKU 1. Slowly remove the cooling copper foil from the position as shown in the figure1 ❖...
- Page 26 Operation instruction Document No. : Primrose disassembly SOP Station 21(1/1) Operation name : Ver. : 0.10 editing date : 2020/2/27 Remove Finger print Dummy Steps： Without Fingerprint SKU 1. Disassembly FPR dummy screw*1。(figure1) ❖ Screw material No : 6052B0156201 (M2.0x2.0) ❖...
- Page 27 Operation instruction Document No. : Primrose disassembly SOP Station 22(1/2) Operation name : Ver. : 0.10 editing date : 2020/2/27 remove Finger print Steps： With Fingerprint SKU 1.Disassemble screw*1。(figure1) ❖ Screw material No : 6052B0156201 (M2.0x2.0) ❖ Torque：1.5 ± 0.2 Kgf．cm ❖...
- Page 28 Operation instruction Document No. : Primrose disassembly SOP Station 22(2/2) Operation name : Ver. : 0.10 editing date : 2020/2/27 Removal Finger print Steps： With Fingerprint SKU 1. Remove the finger print module from the upper shall。(figure1) ❖ Hold the appearance of finger print module on the top page with your fingers and remove it 2，disassemble fpr FFC on finger print module(figure2)）...