MON150CL | Instruction Manual | Important Safeguards Important Safeguards 1. Read, Follow, and Retain Instructions - All safety and operating instructions should be read and followed before operating the unit. Retain instructions for future reference. 2. Heed Warnings - Adhere to all warnings on the unit and in the operating instructions.
MON150CL | Instruction Manual | Safety Precautions For Indoor Product 1. Water and Moisture - Do not use this unit near water - for example, in a wet basement, in an unprotected outdoor installation or in any area classified as a wet location.
MON150CL | Instruction Manual | FCC & ICES Information FCC & ICES INFORMATION (U.S.A. and Canadian Models Only) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and...
MON150CL | Instruction Manual | Front Panel Figure 1: Front Panel Figure 2: I/O Connectors Bosch Security Systems | May 20, 2005 MON150CL Key: A. AUTO (Input)Button B. +, - Buttons C. MENU Button D. Power LED Identification E. Power Button Fig.
Monitor control functions are accessed via the front panel push buttons and the multi- language On-Screen Display (OSD). INSTALLATION Power Model Rated Voltage Voltage Range MON150CL 120/230 VAC 100 to 240 V 26 W EN | 7 Power Sync at Rated Format Voltage NTSC/PAL...
MON150CL | Instruction Manual | Installation 5.2 Desktop Installation The MON150CL monitor is delivered with a 3-pole US-style power cord and a 3-pole Euro-style power cord. Use the US-style power cord where 120 VAC, 60 Hz power is available; and use the Euro-style power cord where 230 VAC, 50 Hz power is available.
MON150CL | Instruction Manual | Operation 5.6 Connecting the Analog VGA Signal to the Monitor There is one (1) 15-pin D-sub connector (Figure 4) for one analog VGA input. Refer to Figure 2, item B. Figure 4: Analog VGA Connector 5.7 Ventilation...
Page 10
MON150CL | Instruction Manual | Operation 6.2.3 Picture Setting (RGB / VGA) H Position Adjusts the horizontal position (0-100) V Position Adjusts the vertical position (0-100) Sharpness Adjusts the sharpness value (1/2/3/4/5) Phase Adjusts the phase value (0-31) Clock Adjusts the clock frequency...
MON150CL | Instruction Manual | On-Screen Display Menu Configuration ON-SCREEN DISPLAY MENU CONFIGURATION CVBS Mode CVBS Bosch Security Systems | May 20, 2005 Video Setting Contrast Brightness Tint Color Volume Exit OSD Menu Language OSD H. Position OSD V. Position...
MON150CL | Instruction Manual | On-Screen Display Menu Configuration VGA Mode RGB (VGA) Bosch Security Systems | May 20, 2005 Colour Contrast Brightness Gamma Correct Colour Adjust Exit Picture H. Position V. Position Sharpness Phase Clock Exit Function Auto Adjust...
Page 13
MON150CL | Instruction Manual | On-Screen Display Menu Configuration 7.2.1 Supported Resolutions VGA Timing Modes 640 x 480 60/72/75 Hz 800 x 600 60/72/75 Hz 1024 x 768 50/60/70/75 Hz Bosch Security Systems | May 20, 2005 OSD Menu Language OSD H.
Page 14
EN | 14 MON150CL | Instruction Manual | Bosch Security Systems | May 20, 2005...
Page 15
EN | 15 MON150CL | Instruction Manual | Bosch Security Systems | May 20, 2005...