Hair Length Indications; Charging; Using The Appliance - Philips 7000 Series Manual

Hair length indications

10
0.5

Charging

Using the appliance

The selected hair length setting will show on the
digital display when you select the desired length
setting with the zoom wheel.
Charging takes approx. 1 hour. Charge the
appliance before you use it for the first time and
when the display indicates that the battery is
almost empty.
1 Make sure the appliance is switched off.
2 Put the adapter in the wall socket and put the
small plug in the appliance.
3 After charging, remove the adapter from the
wall socket and pull the small plug out of the
appliance.
When the appliance is fully charged, it has a
cordless operating time of up to 80 minutes.
Note: This appliance can be used without cord or
directly from the power outlet.
You can use this appliance for a stubble and
a short beard. This appliance has an integrated
vacuum system that catches cut beard hair for
a less mess trimming experience.
The vacuum system is activated automatically as
soon as you switch on the appliance.
Note: Switch off and clean the appliance after
each use.
22
English