Panasonic KX-NT6 Series User Manual page 3

1. LCD (Liquid Crystal Display): KX-NT630 monochrome,
KX-NT680 color.
2. Flexible Buttons: used to seize an outside line or perform a
feature that has been assigned to the button.
3. Soft Buttons (KX-NT630:S1-S4,KX-NT680: S1-S5): Soft
buttons (located from left to right) are used to select the item
displayed on the bottom line of the display.
4. Message/Ringer Lamp: when you receive an intercom call
the lamp flashes green; on outside call the lamp flashes red.
When someone has left you a message the lamp remains red.
5. Next Page: Used to switch the page for the flexible buttons
(KX-NT630 only).
6. Cancel: Used to cancel the selected item.
7. Handset Hook: Keeps the handset stable when the unit is
mounted on a wall.
8. Navigator Key: Used to adjust the volume, etc.
9. ENTER: Used to assign the selected item.
10.MESSAGE: Used to leave a message waiting Indication or
call back the party who left the Message
waiting indicator.
11. PAUSE/PROGRAM: used to insert a pause when
Storing a phone number, also used for programming
this unit.
12. FLASH/RECALL: Used to disconnect the current call and
make another call without hanging up.
13. REDIAL: Used to redial the last dialed number.
14. AUTO ANS/MUTE: Used to receive an incoming
call in hands-free mode or mute the microphone/Handset during
a conversation.
15. AUTO DIAL/STORE: Used for System/Personal
Speed Dialing or storing program changes.
16. CONF: Used to establish a multiple party connection.
17. TRANSFER: Used to transfer a call to another party.
18. FWD/DND: Used to switch Call Forwarding or Do Not
Disturb on your extension.
19. HOLD: Used to place a call on hold.
20. INTERCOM: Used to make or receive intercom calls.
21. SP-PHONE (Speakerphone): Used for performing
hands-free operation.
22. Microphone: Used for hands-free conversation.