Working With Tool Environments; General; Saving With Toolenv - Siemens SINUMERIK 840D sl Function Manual

Detailed Description

2.10 Working with tool environments

2.10 Working with tool environments
2.10.1

General

Functions
The current states of tool data can be processed using the functions below, which are
generally available:
• Save
• Deletion
• Read
• Modify
A further function can be used to determine information about the assignment of the tool
lengths of the active tool to the abscissa, ordinate and applicate.
2.10.2

Saving with TOOLENV

Scope of a tool environment
The TOOLENV memory function is used to save any current states needed for the evaluation
of tool data stored in the memory.
The individual data are as follows:
• The active G code of group 6 (G17,G18,G19)
• The active G code of group 56 (TOWSTD, TOWMCS, TOWWCS, TOWBCS, TOWTCS, TOWKCS)
• The active transverse axis
• Machine data:
• Machine data:
• Setting data:
• Setting data:
• Setting data:
• Setting data:
166
MD18112 $MN_MM_KIND_OF_SUMCORR (Properties of sum offsets in the TO area)
MD20360 $MC_TOOL_PARAMETER_DEF_MASK (definition of tool parameters).
SD42900 $SC_MIRROR_TOOL_LENGTH (Sign change tool length when mirroring)
SD42910 $SC_MIRROR_TOOL_WEAR (Sign change tool wear when mirroring)
SD42920 $SC_WEAR_SIGN_CUTPOS (Sign of wear for tools with cutting edge systems)
SD42930 $SC_WEAR_SIGN (sign of wear)
Basic logic functions: Tool Offset (W1)
Function Manual, 11/2006, 6FC5397-0BP10-2BA0