Warning And Safety Instructions - Miele A 105 Operating Instructions Manual

Upper injector basket
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 31
en - Warning and Safety instructions
36
To avoid the risk of accidents and damage to this upper basket
please read these instructions carefully before using it for the first
time.
Keep these instructions in a safe place where they are accessible
to users at all times.
 Please also read the operating instructions for your washer-
disinfector and pay particular attention to the Warning and Safety
instructions.
This upper basket is only for use in the areas of application as
defined in the Operating instructions. Components such as injector
nozzles must only be replaced with Miele accessories or original
parts. Any other application, modification or change is unauthorised
and could be dangerous.
Miele cannot be held liable for damage caused by unauthorised use
or incorrect operation.
Inspect all mobile units, baskets, modules and inserts daily as de-
scribed in the "Maintenance" section in the Operating instructions for
the washer-disinfector.
New mobile units and baskets must be washed in the washer-dis-
infector without a wash load prior to first use.
Only items which have been declared by their manufacturer as
suitable for machine reprocessing may be processed. The manufac-
turer's specific reprocessing instructions must be observed.
Disposable instruments must not be put into the machine for
processing.
The processing programme used should include thermal disinfec-
tion, and must be suitable for the material quality of the wash load.
To minimise the risk of injury, the mobile unit should be loaded
from the back forwards and unloaded in the reverse order.
To clean and disinfect hollow instruments thoroughly from the in-
side they must be attached to the relevant holders or injector nozzles
on the injector manifold. The connectors must not come loose during
a programme!
Hollow instruments which have come away from their connectors
during the programme must be processed again.

Advertisement

Table of Contents
loading

Table of Contents