Maintenance - Philips Urbanspark BDP301 LED 4M 7043 Mounting Instructions

Table of Contents

Advertisement

Maintenance

Panel
------ Normally you don't need to clean the panel frequently. It depends on the local environment;
------ If in heavy dust area,It is required to clean the solar module regularly with a damp towel to guarantee
optimum performance of the solar panel;
------ Do not use any type of solvent for cleaning and be careful not to put too much pressure on the
module while cleaning;
------ You Should clean small ads regular;
------ You should trim the trees and branches which cover the PV panel regular;
Battery
------ Battery normally does not need any maintenance within the warranty. If any abnormal symptom or
special requirement, suggest following test can be taken:
1. Check whether there is some loose connection;
2. Measure and record ambient temperature in the pole;
3. Check the battery if it has deformation;
Battery Storage
The battery should be stored in clean and dry environment.
Storage time: battery is ex-work in fully charged, storage time should be limited. For ensuring battery
performance, do not exceed storage time as following definition:
Under -20℃~25℃, six months;
Under -20℃~35℃, three months;
Under -20℃~45℃, one month;
Warning
------ The recycle of the used battery should strictly follow the local laws and regulations. It is forbidden to
handle the battery as normal garbage for disposal;
------ Do not open, short circuit, or mutilate batteries as injury may occur;
------ Do not put the battery into a pool;
------ Never move battery by pulling the cables of the battery;
------ The installation is highly suggested during the day.
------ Only be charged with authorized charger by Philips.
------ Handle the panel pole and battery with great care during the installation and transportation;
------ ALWAYS keep sparks, flames and smoking materials away from the battery
------ In case of FIRE: To extinguish a fire of a battery, use CO2, foam, or dry chemical extinguishing media.
Do NOT discharge the extinguisher directly onto the battery. The resulting thermal shock may cause cracking
of the battery case/cover.
Important
If you have ANY question concerning safety when working with the battery system, contact your
local Philips sales/service representative to clarify any of the noted safety precautions, or, call the
corporate office number listed on the back of this manual and ask for professional service.
Maintenance

Advertisement

Table of Contents
loading

This manual is also suitable for:

Urbanspark bdp301 led 6m 7043Urbanspark bdp301 led 4m 9006Urbanspark bdp301 led 6m 9006Zjs601 60ah 12.8vZjs601 100ah 12.8v911401800802 ... Show all

Table of Contents