GAS-Guard 8 and GAS-Guard 3 Operations and Maintenance Guide
810-1734-00 Rev A
Manual DGA Sampling
A manual DGA sample port is installed in-line with the GAS-Guard oil supply tubing. Siemens
recommends this port for correlation of GAS-Guard data to manual DGA data. The location of the
sample port will vary by installation. The sample port provided with the GAS-Guard is a ¼-in locking
valve with a 1/4-in FNPT fitting. No special procedures are required when obtaining a manual DGA
sample.
Figure 3: DGA sample port
Operational Parameters
Please see the "Siemens GAS-Guard Data Sheet" available online at www.serveron.com.
10 of 18