Huawei AR500 Series Hardware Description page 714

Huawei
AR500&AR510&AR531&AR550&1500&AR2500
Industrial Switch Routers
Hardware Description
Figure 6-47 Structure of a serial cable (CON/RS232)
1 8
Pin Assignments
The X1 end of a serial cable is an RJ45 connector, and the other end is an RJ45 or another
type of connector. Connect the serial cable according to the pin assignments of the X1 end, as
listed in
Table 6-75 Pin assignment of a serial cable (CON/RS232)
X1
1
2
3
4
5
6
7
8
Connection
A serial cable (CON/RS232) has an 8-pin RJ45 connector at one end and an RJ45 or another
type of connector at the other end. It is connected as follows:
l
l
Ordering Information
None
6.5 6-pin Serial Cable
Issue 10 (2019-03-06)
Network port connector
(8-pin, RJ-45)
X1
Table 6-75.
The 8-pin RJ45 connector is connected to a serial port of the router.
The other end is connected to a serial port terminal.
Copyright © Huawei Technologies Co., Ltd.
Main Label
Signal Type
CON_RTS
CON_DTR
CON_TXD
CON_DCD
GND_RS232
CON_RXD
CON_DSR
CON_CTS
6 Cables
703