Step
1
Turn the power off (wait until the outdoor device LED is turned off)
2
Remove compressor wires.
3
Measure the voltage as shown in the figure.
4
Check the voltage for being in the range of 0.4~0.6V.
5
Judge IPM Pins for short.
IPM Check Point
2/2.5kW
Copyright ©2013 LG Electronics. Inc. All right reserved.
Only for training and service purposes
Flow of Inspection
IPM Check Point
P U V W
- 80 -
4. Trouble Shooting
N
N
N
u
v
w
LGE Internal Use Only