Operating Dehumidifier - Whirlpool 1185020 Use And Care Manual

6
Control C
If your control looks like C:
TO TURN DEHUMIDIFIER ON:
Press the ON/OFF button. All lights will
flash once. If the Empty/Adjust Bucket
light comes on, the dehumidifier will not
operate. Empty or adjust bucket.
Each time you unplug the dehumidifier
or power is interrupted, the control will
return to your previous settings.
MODE SELECTION
Press MODE button to select fan speed.
Choose LOW, HIGH, CONTINUOUS or
AUTO DRY.
If you have selected LOW or HIGH:
Press or to set the amount of
moisture you want removed. Pressing
increases the amount of moisture
removed; pressing
amount of moisture removed.The
indicator light will change according to
the number of times you press
If you have selected CONTINUOUS:
You cannot change the amount of
moisture you want removed.

Operating dehumidifier

AUTO DRY
CONTINUOUS
MOIST
HIGH
LOW
ON / OFF MODE
selects mode
decreases the
or
DRY
EMPTY /ADJUST
BUCKET
adjusts humidity removal set point
(amount of moisture removed from room)
Pressing or
decrease the amount of moisture
removed.
If you have selected AUTO DRY:
Press or
moisture you want removed. The
dehumidifier will automatically adjust
fan speed and/or turn on and off to
maintain your setting.
TO TURN DEHUMIDIFIER OFF:
Press the ON/OFF button.The
dehumidifier will retain your last
settings.
EMPTY/ADJUST BUCKET light:
If this light is on, the dehumidifier is not
running. This light indicates that you
need to check:
• If the bucket is full, empty bucket and
replace.
• If the bucket is not in position,
.
remove bucket and replace. Make
sure the bucket fits all the way into the
dehumidifier and the light is off,
or dehumidifier will not run.
indicates the bucket is full
OR
the bucket is not in position
will not increase or
to set the amount of