Maintenance - Husqvarna BR600 Operator's Manual

2. When clearing narrow surfaces such as paths, the
product can be used so that it throws materials
straight in front of you. If you want to work on wider
surfaces, you may need to work at an angle so that
strands form on one side. Strands comprising light
materials can be collected into one row or pile for
later removal while hard or more bulky materials may
need collecting in several strands.
3. In order to get into corners, remove the splash guard
and loosen the accessory coupling and rotate the
accessory half a turn.
Introduction
Below you will find some general maintenance
instructions. If you need further information please
contact your service workshop.
To do maintenance on the accessory
CAUTION: The accessory operates in dirty
conditions. If you have a gasoline operated
product, it is very important to do
maintenance of the air filter regularly. The air
filter must be lubricated with oil to operate
satisfactorily. Refer to the operator's manual
of the power unit for maintenance
instructions.
WARNING: The gear housing gets hot when
the product has been in use. To avoid
218
4. Keep a small working angle to the surface. Too large
a working angle means the sweeper tends to move
towards you and you risk losing control of the
product.

Maintenance

1. Check that the brush drums do not rotate when the
throttle/power trigger is released.
2. Check that the brush drums are not damaged or
cracked. Replace the brush drums if necessary.
3. Hang up the brush when in storage for long periods.
WARNING: Rubbish will then be thrown
back towards the user. Use a lower
speed when reversing the product and
remember that it is easy to trip over.
burning yourself do not touch the gear
housing.
738 - 003 - 13.12.2019