Kenwood DMC-P33 Operation Manual page 44

Changing the sound mode (only by remote control
operation) (30 page)
Press the MODE key 4 times (during playback or stop).
÷ The mode changes each time the ¢ or 4 keys are pressed.
Setting the sound of your liking (31 page)
1
Press the MODE key for 2 seconds or longer (during playback or stop).
Press the ¢ and 4 keys while "BASS" is displayed and set the bass sound.
2
3
Press the MODE key once while the bass sound level is displayed.
Press the ¢ and 4 keys while "TREB" is displayed and set the treble sound.
4
CONVENIENT FUNCTIONS
Avoiding faulty operation (HOLD) (19 page)
When you are operating the unit on a train or when you are carrying it with the power off, this function allows you to
prevent faulty operation due to accidental key operation. (Both the main unit and remote control should be carried with
the HOLD function engaged.)
÷ Slide the HOLD switch in the direction indicated by the arrow.
Setting the operating tone (beep) (only by remote control operation) (33 page)
1
Press the MODE key for 2 seconds or longer (during playback or stop).
2
Press the MODE key twice while "BASS" is displayed.
Press the ¢ or 4 key while "BP on" is displayed.
3
÷ The mode changes each time the ¢ or 4 keys are pressed.
"BP off" : The operating tone will beep twice, but will then stop beeping.
"BP on" : The operating tone will beep once, and will then beep when an operation key is pressed.
Checking the battery level (32 page)
ress the MODE key 5 times (during playback or stop).
P
÷ The battery level display does not change in proportion to the playback time. Use it as a guide.
÷ When the battery is almost completely exhausted, the character information will flash (remote control).
When the battery has completely run out, "LoBATT" will be displayed on the remote control. The power to the player
will be disconnected automatically.
44
"SOUND1"
"SOUND2"
"SOUND3" Select the sound of your liking
"SOUND4"
"SOUND5"
"USER" : Set the sound of your liking
"NORMAL" : Cancel the sound mode