Basic operation (Ethernet model)
Operation mode switchover/Frequency setting
Network operation mode
First screen (Output frequency
*1
For the details of operation modes, refer to
*2
The monitor item can be changed. (Refer to
*3
Not displayed for the 575 V class.
*4
For the details of the fault history, refer to the Instruction Manual (Maintenance).
Parameter setting mode
In the parameter setting mode, inverter functions (parameters) are set.
24
2. Basic Operation
2.1 Operation panel
(at power-ON)
PU operation mode
*1
Change the setting.
monitoring)
*2
(Output current
PU operation mode
Parameter clear
All parameter clear
Group parameter setting
(Example)
Blinking
Fault record 1
The last ten fault records can be displayed.
When the fault history is empty, only the fault number is displayed.
page
page
*1
Frequency setting written and complete
Second screen
monitoring)
*2
The present setting is
displayed.
Fault history clear
Automatic parameter setting
(Example)
*4
174.
226.)
PU Jog operation mode
Blinking
Third screen
(Output voltage
Change the setting.
Parameter write complete
Initial value change list
(Example)
Blinking
Fault record 2
Fault record 10
*4
*1
monitoring)
*2
Blinking
PM initialization
*3
Blinking
*4