GE GFXP1308FWW Installation Instructions Manual page 2

2 PREPARE THE PEDESTAL
Pull the drawer out as far as it
A
will go.
Remove screws
B
from drawer
slides. Slide
drawer out of the
base and
set aside.
Do not remove
C
the foam blocks
on the top of the
pedestal.
Installation Instructions
2
3 INSTALL THE PEDESTAL TO THE
WASHER OR DRYER
Place the pedestal against the bottom of the
A
unit. Check to be sure the drawer front is at
the front of the washer.
To attach to the dryer:
Align the holes in the pedestal with the holes
B
in the bottom of the unit. Use a Phillips
screwdriver to install the 4 screws through the
pedestal and into the unit – do not tighten.
Slide the pedestal toward the unit until it is
C
aligned front to back. Use an 8 mm socket
wrench to securely tighten the screws.
Align the holes in the pedestal with the holes in
B
the bottom of the unit. Use a 9/16" socket
wrench to install the 4 washer mounting bolts
through the pedestal and into the unit – do not
tighten.
Slide the pedestal toward the unit until it is
C
aligned front to back. Use a 9/16" socket
wrench to securely tighten the bolts.