ABB IRC5 Compact Product Manual page 186

4 Repair
4.18 Replacement of Ethernet switch
Continued
Refitting
Use this procedure to refit the Ethernet switch.
1
2
3
4
5
6
7
8
186
Action
DANGER
Before commencing any work inside the cabinet, please observe the safety information
in section DANGER - Make sure that the main power has been switched off! on page
ELECTROSTATIC DISCHARGE (ESD)
The unit is sensitive to ESD. Before handling the unit please read the safety information
in the section WARNING - The unit is sensitive to ESD! on page 34
Refit the Ethernet switch.
Refit the safety board and secure it with the attachment screws.
Refit the safety board unit and secure it with the attachment screws.
Reconnect all connectors to the Ethernet switch, Remote Service box, and safety
board.
Refit the cabinet cover.
Perform the function tests in section
features work properly.
© Copyright 2009-2017 ABB. All rights reserved.
Function tests on page 118
Product manual - IRC5 Compact
3HAC047138-001 Revision: G
33.
to verify that the safety