Summary of Contents for HP StorageWorks ESL E Series
Page 1
ESL E-Series Ultrium FC Drive StorageWorks Replacement Caution: Parts can be damaged by Note: This part is hot-swappable. It is not electrostatic discharge. Keep parts in their necessary to power down the library to containers until needed. Ensure you are replace this part.
Page 2
Drive Removal Disconnect the Fibre Channel (FC) cable from the Identify the drive to be replaced. drive to be replaced by 1) pressing down on the The LED of the drive to be replaced will be off. cable connector tab and 2) pulling the connector CAUTION: To avoid damaging the drive, away from the drive.
Page 3
Select the Back button to return to Menu. Use the Command View TL user interface to reboot the interface controller card. Refer to the HP StorageWorks Interface Manager and Command View TL User Guide for detailed procedures. Verify that the FC port LED on the FC interface controller card is green.
Page 4
Close the back door of the library. Getting help • HP product information: http://www.hp.com/products/esle • HP technical support and phone numbers: http://www.hp.com/support • HP StorageWorks Library and Tape Tools (L&TT) diagnostic software: http://www.hp.com/support/tapetools • Interface Manager and HP StorageWorks Command View TL: http://www.hp.com/support/cvtl...