Data Profiles Available For Lte; Turning On The Lte With Lte Button - Motorola APX 7000 User Manual

The table below describes the condition when the radio works in different operating systems with LTE.
System Operation Scenarios
IV&D LTE and IV&D are mutually exclusive. Both systems cannot operate at the same
time.
LMR The radio is preprogramed to stop LTE operation when radio switched to a LMR
700MHz frequency.
When the radio is switched to operate in 700 MHz LMR, LTE operation is turned
off. The radio can still operate on 700 MHz LMR where the LMR voice and data
are available to the user.
LTE is operational again when the frequencies are switched back to either a
VHF or a 800 MHz LMR frequency.
The LTE feature can be preprogrammed to a programmable button for quick access to LTE screen or
to activate LTE feature. The LTE button must be preprogrammed by a qualified technician before user
can use it.
2.18.1

Data Profiles Available for LTE

There are three different profiles available for LTE data operation.
Broadband Only
Use only LTE data transmission network. In the absence of LTE coverage, the radio has no data
functionality.
Trunking and Broadband
Use LTE data transmission network when available. When LTE is not available or turned off, the
radio falls back to using IV&D LMR data, if available. Once LTE coverage becomes available again,
the radio reverts back to using LTE data transmission network.
Conventional and Broadband
Use LTE data transmission network when available. When LTE is not available or turned off, the
radio falls back to using Conventional LMR data, if available. Once LTE coverage becomes
available again, the radio reverts back to using LTE data transmission network.
2.18.2

Turning On the LTE with LTE Button

Procedure:
Press and hold the preprogrammed LTE button.
The display shows LTE ON to indicate radio is initating the LTE connection.
The display shows LTE CNTD once the radio is connected.
If there is an encryption error, the display shows LTE SVC alternating with ERROR.
If there are no LTE networks available, the display shows No LTE alternating with SERVICE.
NOTICE: It is advisable to turn off the LTE if the radio prompts LTE service error or No
LTE service. For the error no LTE service available, turn on the LTE after you moved to
another site to check the availablity.
6875952M01-NK
Advanced Features
77