Cab Controls - Toro Groundsmaster 360 Operator's Manual

3. To enter the PIN code, press the center button
until the correct first digit appears, then press
the right button to move on to the next digit
(Figure 11B and
until the last digit is entered and press the right
button once more.
4. Press the middle button to enter the PIN code
(Figure 11D).
Wait until the red indicator light of the InfoCenter
illuminates.
Note:
If the InfoCenter accepts the PIN code
and the protected menu is unlocked, the word
"PIN" displays in the upper right corner of the
screen.
Note:
Rotate the key switch to the O
then to the O position locks the protected menu.
N
You can view and change the settings in the Protected
Menu. Once you access the Protected Menu, scroll
down to Protect Settings option. Use the right button
to change the setting. Setting the Protect Settings to
O allows you to view and change the settings in
FF
the Protected Menu without entering the PIN code.
Setting the Protect Settings to O
options and requires you to enter the PIN code to
change the setting in the Protected Menu. After you
set the PIN code, rotate the key switch O
to the O position to enable and save this feature.
N
Figure 11
Figure 11C). Repeat this step
position and
FF
hides the protected
N
and back
FF

Cab Controls

Model with Cab Only
1. Fan control
2. Temperature control
3. Windshield-wiper switch
g028522
Air-Recirculation Control
Sets the cab to either recirculate the air in the cabin or
to draw air into the cabin from outside
•
Set it to recirculate the air when using the
air-conditioning.
•
Set it to draw air in when using the heater or fan.
Fan-Control Knob
Rotate the fan-control knob to regulate the speed of
the fan (Figure
Temperature-Control-Knob
Rotate the temperature-control knob to regulate the
air temperature in the cab
Windshield-Wiper Switch
Use this switch to turn the wind shield wipers on or
off (Figure 12).
Air-Conditioning Switch
Use this switch to turn the air conditioning on or off
(Figure 12).
Windshield Latch
Lift up the latch to open the windshield
Press in the latch to lock the windshield in the open
position. Pull out and down on the latch to close and
secure the windshield.
18
Figure 12
4. Air-conditioning switch
5. Air-recirculation control
12).
(Figure 12).
g198816
(Figure 12).
(Figure 13).