Huawei SUN2000 Series Quick Manual page 18

4G Smart Dongle
LED
6
Commissioning
Scenario 1: Smart Dongle Networking Scenario
6.1
1. Downloading the App
Search for "FusionSolar" in Google Play or
scan the corresponding QR code, download
the latest installation package, and install the
FusionSolar app by following the instructions.
Google Play (Android)
•
In areas (such as the UK) where the FusionSolar app is not available, or when a third-party
management system is used, only the SUN2000 app can be used for commissioning. This
document uses the FusionSolar app as an example to describe the commissioning method. For
the SUN2000 app, perform operations as required.
•
Search for "SUN2000" in Huawei AppGallery, download the latest installation
package, and install the SUN2000 app by following the instructions. The
SUN2000 app version should be 3.2.00.002 (Android) or later.
•
The initial password for connecting the inverter WLAN is Changeme
•
The initial password of the installer is 00000a
•
Use the initial password upon first power-on and change it immediately after login. To ensure
account security, change the password periodically and keep the new password in mind. Not
changing the initial password may cause password disclosure. A password left unchanged for a
long period of time may be stolen or cracked. If a password is lost, devices cannot be accessed.
In these cases, the user is liable for any loss caused to the PV plant.
LED
Color Status
Yellow (blinking Steady on
green and red
simultaneously)
Green Blinking in a 2-second
cycle (on for 0.1s and then
off for 1.9s)
Blinking at long intervals
(on for 1s and then off for
1s)
Steady on
Blinking at short intervals
(on for 0.2s and then off for
0.2s)
Android
•
Data in the screenshots is for
reference only. The actual
screens prevail.
•
The latest Android version is
required for local
commissioning. The iOS
version is not updated and can
be used only for viewing PV
plant information. You can
search for "FusionSolar" in App
Store or scan the QR code to
download the iOS version.
17
Description
The Dongle is secured and
powered on.
Dialing (duration < 1 min)
The dial-up connection is set
up successfully (duration <
30s).
Successfully connected to
the management system.
The inverter is
communicating with the
management system
through the Dongle.
App Store
(iOS)
SUN2000 app