ABB Symphony Harmony Series Instruction page 47

Specifications
Table 1-3. NTHS03 Termination Unit Specifications
Property
Outputs
(continued)
I/H converter
Position panel meter
Unscaled position feedback
Test mode
Digital
Cable insulation
PVC (UL rating PLTC)
Non-PVC (UL rating PLTC)
Mounting
Surge Protection
Environmental
Ambient temperature
Relative humidity
Altitude
Air quality
Cooling requirements
1 - 6
(continued)
Characteristic/Value
1 analog
Output Current (mA)
4 - 20
20 - 160
1 analog (scaled feedback output)
Output Current (mA)
4 - 20
1 analog
Output Current (mA)
2
1 analog
Output Current (mA)
1
1 independent, optically isolated (250 VDC), open collector
output (hard manual)
State Voltage (VDC)
On 2.4
Off 24
80°C (176°F) at 300 V
90°C (194°F) at 300 V
Mounts on the field termination panel.
Meets IEEE-472-1974 Surge Withstand Capability Test
0° to 70°C (32° to 158°F)
5% to 95% up to 55°C (131°F) (noncondensing)
5% to 45% at 70°C (158°F) (noncondensing)
Pollution degree: I
Sea level to 3 km (1.86 mi)
Noncorrosive
No cooling is required when used in ABB Automation cabinets
and operated within environmental limits.
Maximum Impedance (Ω)
300
15
Maximum Impedance (Ω)
300
Maximum Impedance (Ω)
5000
Maximum Impedance (Ω)
5000
Current
250 mA
10 µA
WBPEEUI260047A0