7. Fine adjustment of vertical position
1. Loosen the screw in the middle on the right side.
(Refer to page 14.)
2. Turn the height adjusting screw to adjust the height.
• Repeat steps 1 to 7 to fine adjust the image to the screen.
See page 22 for details on adjustment range.
!-5. Retighten the eight previously loosened securing screws.
Be careful not to overly tighten the securing screw.
HAS-WM03
Supplied Allen
wrench (N)
16
Note:
Do not loosen these Four
screws.
A
A
B
B
Ins
@
@