Troubleshooting - Toro RP-1200D Operator's Manual

Troubleshooting

Problem
The engine will not start, starts hard, or
fails to keep running.
The plate does not vibrate at full speed.
The clutch is extremely hot.
The plate does not vibrate when the
engine is running.
Possible Cause
1. The fuel tank is empty.
2. The air cleaner is dirty.
1. The oil level in the eccentric housing
is too high.
2. The belt is loose.
1. A foreign object is lodged against the
eccentric sheave.
2. The oil level in the eccentric housing
is too high.
3. The clutch is slipping.
4. The engine speed is not reaching full
rpm.
1. The belt is broken.
2. The clutch is broken or worn out.
3. The eccentric has seized.
20
Corrective Action
1. Fill the fuel tank with fuel.
2. Clean or replace the air cleaner
element.
1. Check the oil level and drain as
necessary.
2. Adust the belt tension.
1. Remove the obstruction.
2. Check the oil level and drain as
necessary.
3. See your authroized Toro service
dealer.
4. See your authroized Toro service
dealer.
1. Replace the belt.
2. Replace the clutch.
3. Ensure the eccentric is free turning.