Operation; Working With The Simatic Mv320 Reader - Siemens SIMATIC MV320 Operating Instructions Manual

Operation

6.1

Working with the SIMATIC MV320 reader

Without metal stand
1. Hold down the trigger button of the reader.
2. The two blue beams sent out by the reader are used for targeting.
The blue beams must be directed to the center of the barcode. The ideal read distance
between the device and barcode is approximately 10 cm.
As soon as the reader is at the optimum read distance, the barcode is read. To confirm that
the barcode was read correctly, the reader generates a beep, vibrates and a green LED
flashes.
Note
Changing factory settings
To change factory settings, scan in the appropriate code: See section Code configurations
(Page 53).
SIMATIC MV320 / SIMATIC MV325
Operating Instructions, 08/2015, C79000-G8976-C352-03
6
29