Miele DA 6890 Operating And Installation Instructions page 25

a The motor can be rotated for installation, so exhaust air can be extracted
upwards, left, right or downwards.
The motor can also be fitted in the same position at the back of the appliance.
If the motor is fitted at the back of the appliance, the back panel of the furniture
housing unit must be cut out in the installation area and sufficient installation
space must be provided behind the unit.
b The electrical connection box can be positioned as required on the left beside
the motor on the hood itself or in the housing unit.
c Ensure that materials are sufficiently stable.
d Stepped cut-out for flush-fit installation in stone worktops (granite, marble)
Exhaust connection 150 mm
Cannot be installed in conjunction with a gas hob.
If you are planning to install an oven/cooker in front of the appliance, the
appropriate installation advice and dimensions regarding cool air circulation
must be observed.
The installation location must be easily accessible. The downdraft extractor must
also be freely accessible and located such that it can be dismantled in the event of
future service requirements.
Installation
25