Safety Precautions - Toshiba TA-FVW100 Instruction Manual

Safety Precautions

Important information is written on the product and in this instruction manual about how to use the product safely
z z
and correctly to avoid damage to property or injury to people using the product or to other people. You should fully
understand these precautions (symbols and icons) and follow the instructions here before reading the main part of this
manual.
Explanation of symbols
This indicates that incorrect use may result in
death or severe injury to the user.
This indicates that incorrect use may result in
injury to the user or damage to property.
To avoid a fire, electric shocks, burns, injuries, or other problems
Stop use immediately if there is a
malfunction or any other problem.
y Immediately unplug the power cord, and ask your
z
retailer to inspect and repair your cordless steam
iron.
Examples of problems and malfunctions.
y The power plug or cord gets abnormally hot.
z
y Fabrics shrink or are burned.
z
y The state of the temperature lamp changes from
z
lighting to flashing when the power cord is moved.
y The body of the iron is unusually hot or it smells
z
like something is burning.
Handling and usage
Do not let children use the iron alone, and
keep it out of reach of infants.
It may cause injury, burns, or electric shock.
Do not use the iron if it is damaged or
leaking water.
Do not leave the iron unattended while it is
turned on.
It may cause a fire.
This product is not intended to be used
by people with reduced physical, sensory,
or mental capabilities, or by people with
insufficient intelligence and experience
(including children) other than under the
supervision and guidance of a person
responsible for their safety.
Please follow these instructions
Explanation of icons
This indicates things you are prohibited from
doing.
This indicates instructions you need to observe.
Power cord and power plug
Use a standalone electrical outlet rated to 7
A or higher and 220 VAC power source.
y Do not use extension cords, do not use other appli-
z
ances at the same time from the same electrical
outlet, and use only a 220 VAC power source.
If there is any dust on the power plug's
blades or the surface where the blades are
connected, wipe it off with a dry cloth.
y Do not use a power cord other than the specified
z
one provided.
Hold the power plug (power supply side
or stand side) when removing it from the
electrical outlet or the stand.
Unplug the power plug (power supply side)
from the electrical outlet, if not using the
iron.
Do not plug or unplug the power plug
(power supply side/stand side) with wet
hands.
Do not disassemble, repair or modify the
product.
y For repairs, contact the THS call center.
z
2