Husqvarna Style 4982 Product User Manual page 6

Choosing safety shoes
Choose the right safety shoe based on user needs and
working environment, and make sure it fits well on your
foot for optimal safety and comfort. This product is
meant for forestry work. Ask your dealer for help in
choosing the right product.
Categories
The shoes are labelled with information regarding
performance and safety class.
Definition of label
Category
Safety toecap 200 J (falling
objects) 15 kN (crushing injuries)
Closed heel
A Antistatic 100 kø-100 Mø
E Energy absorption heel 20 J
WRU Water repellent upper part
Patterned outer sole
P Penetration resistance (nails
etc.)
SRA - Slip resistance on ceramic tile floor SRB -
Slip resistance on steel floor
SRC - SRA + SRB
FO – Oil and fuel resistant
CI – Cold insulation
HI – Heat insulation
AN – Ankle protection
Saw protection
The shoes´ saw protection is made of rubber and
fiber material that can tear into the chain.
Class Chain speed, m/sec
1 20
2 24
3 28
This product conforms to the applicable
EU Directive.
Important!
• Safety shoes cannot eliminate the risk of injury but
they will reduce the degree of injury if an accident
does happen.
• Use, maintain and store the shoes in the right way.
• Check that the shoes are intact and in good
condition before each use. Shoes that have an
altered shape or have been damaged in any way do
not provide the same protection and should be
discarded. Accessories can reduce the shoe's
protective capabilities.
• Never sew in the protective material and never use
glue to repair the outer material. This can reduce the
protective capabilities.
6 – English
Product user guide
SB S1 S2 S3
X X X X
X X X
X X X
X X X
X X
X
X
• Keep the safety shoes away from sharp objects,
acids, oils, solvents, fuels and animal droppings.
• Clean the safety shoe immediately in case it has
been subjected to petrol, oil, grease or other
flammable materials. Fire hazard!
• The soles on new shoes can be slippery before the
outer layer has become rugged. Be aware of the slip
risk with new shoes.
• Note that the height of the protective zone above the
inner sole, is not related to the size of the safety
shoe. Ensure that the legs of the protective trousers
are overlapping the stem of safety shoe.
• The heat resistance of the outsole (PU) is 120°C.
• Please read the manual provided with the motorized
equipment carefully and make sure you understand
the instructions before using the machine.
• For normal wear, we recommend the product to be
replaced after 2 years.
Care instructions
• The service life of the safety shoes is affected by
usage, working environment and care. By correct
usage and care the service life of the shoes can be
prolonged.
• Clean the safety shoe with damp cloth or sponge. Do
not use any polishing or corroding cleaning agents.
• A wet safety shoe should air dry slowly and away
from heat sources such as radiators or direct
sunlight.
• Store the safety shoes standing up in a dark and dry
area.
Manufacturer and standards
Responsible manufacturer: Husqvarna AB,
SE-561 82 Huskvarna, Sweden, tel: +46-36-146500.
These safety shoes Style 4982, 4984, 4986, 4987.
comply with fundamental safety requirements in EU
directive 2016/425.
EN ISO 17249:2013
Type approval performed by 0404: RISE SMP
Svensk Maskinprovning AB, Box 7035, 75007
Uppsala, Sweden.
Responsible manufacturer: Husqvarna AB, SE-561
82 Huskvarna, Sweden, tel: +46 36 14 65 00.
Declaration of conformity is availableon
www.husqvarna.com Use the searchfunction and
search for the product.