Pairing Your Wrsm; Subsequent Connection - Motorola PMMN4096 User Manual

Pairing Your WRSM

Procedure:
1
Verify that both the host and the WRSM are powered ON (First time
only: Once the WRSM is powered ON, if not previously selected,
the WRSM will instruct the user to select language or tone, and then
it goes into Pairing Mode automatically.).
2
Both the WRSM and wireless host must be within pairing range
(recommended pairing range is within 1 meter).
3
Once the devices are paired successfully, a "Pairing Successful"
tone or "Connecting" voice prompt is played on the WRSM.
4
Press the MFB button to start the connection process when you
hear the "Ring" tone indicating Host is requesting for connection.
5
Wireless Link Connected with Host indication is provided upon
successful link establishment (refer to Table 2.5 on page 10).
6
Your WRSM is now ready to be used.
10
English

Subsequent Connection

Same Host:
If the Bluetooth link is lost, connection will be automatically
reestablished when the host and device come within 10 meter range
(line-of-sight).
New Host:
1
Put the wireless device in Pairing Mode by powering ON while
pressing the PTT button simultaneously.
2
Follow steps from Pairing Your WRSM.
Table 2.5: Wireless Link and Pairing Indicators
State Indication LED
Entered Pairing
Blue LED blinking
Mode
Not Paired Blue LED blinking
Paired Blue LED Solid
Successfully for 2 seconds
Blue LED
Wireless Link
Heartbeat:
Connected with
Long OFF and
Host
Short ON
Tone
Voice Prompt
Indication
— "Cleared"
Pairing Ready "Searching for
tone Host"
Pairing
"Connecting"
Successful tone
"Headset
Connected tone
Connected"